The List of STEROIDS I Have Homebrewed

Kai Palikiko           Mar.  22, 2020

Kai Palikiko has had over 10 years personal experience with Anabolics. His Personal Training Techniques have been responsible for thousands of men achieving their personal and professional goals, and you are getting access to the copy n paste steps to replicate them.

The biggest question that I get for the guys who are already initiated into this Gear lifestyle, in terms of homebrew is this - what can I actually homebrew? Which compounds, which orals, which pinnables? What's going on brother? My name is Kai, and if you have any questions for me, the best way to reach me is the link to my email. And you can easily find that link in the description, you click on that link, it takes you to a website. 

Now once you're there, you put in your name, your email, any questions you have for me, it's gonna go directly to my ProtonMail.

When it comes to the subject of homebrewing, I'm going to give you the list of all the compounds I have ever homebrewed when it comes to the pinnacles and orals, and of course, my experience levels with that as well. So when it comes to the pinnacles, let me state it like this. every single possible compound that can be homebrewed, I have homebrewed it. If I didn't stated it in this video doesn't mean I didn't homebrew it, I just forgot, but when it comes to all the pinnables.

All possible dosages, all esters, all compounds, I have homebrewed it, and I have taken it simply because I want to experience it, see what it's all about, what results I'm going to get out of it as well. And of course just to see what I can do when it comes to the homebrew procedure. So just to give you a little bit of understanding in terms of the homebrew process, I take it very seriously. It's not like I'm just going around, throwing it all, everything on there. No, I'm very accurate and very precise. And just like my pin session, I treat it like a ritualistic type of event.

When I homebrew, I'm very precise with everything. I make sure when I'm there, I have everything already, I'm not going to start any homebrewing procedure unless of course I have all the materials, I have all the compounds, I have the raw powder itself. I just got to make sure that I have the peace of mind knowing I am set, I am ready to go.

Like hypothetically, if I were to homebrew test cypionate for example, for my TRT, I gotta make sure everything is there, the solutions, the compounds, the raw powder, and of course, everything that I need to bottle that as well, just to be sure that I have everything set and ready to go. Now, when it comes to the time of all the pinnables pretty much, like the majority of the pinnables, it only takes me, and again, this is not a race, I'm not trying to state this as I try to be my record. 

This is just more of a data and it's good to have. I don't even really keep time of it, it just so happens oh cool, that's how long it takes me to homebrew these pinnable compounds. So the average time when it comes to any pinnable, it takes me about 20 to 25 minutes. For example, if I were to homebrew Sustanon or test enanthate, it is going to take me roughly about 20 to 25 minutes. 

When it comes to the actual image of it, the aesthetics of it, even though it's a bulking agent, it doesn't aromatize, but I'll get to that in a minute when it comes to the post cycle therapy stuff, it doesn't aromatize.

100% Free Live Online Workshop 

How To Homebrew and Pin Your Own Gear To Get 21" Arms Plus A Six Pack WITHOUT Risking Gyno or Spending $897 A Cycle!

How To Homebrew and Pin Your Own Gear To Get 21" Arms Plus A Six Pack WITHOUT Risking Gyno or Spending $897 A Cycle!

That's how easy it is when it comes to homebrewing it, when it comes to my personal procedure.

Now this is just data, again, I'm not stating this as a, God, this is bad, but whatever, I just want to share my experience with you. The fastest I've ever homebrewed a compound, which was test cypionate a few years ago, it took me about six to seven minutes homebrewing it, from raw powder into actual vial, ready to go for pin. That's how quickly I was able to homebrew that test cypionate. And again, it's not a race, it was just for the sake for data.

And in terms of time, the only reason why I know the times is just because I just want to have the data on it. When I'm approaching the homebrew procedure, I'm not gonna look and say, ok, cool, the last time I homebrewed it within about 25 minutes, I gotta beat that record, I gotta stay within that timeframe. No, when I'm home brewing, I'm taking my time. I literally have the TV on or I am watching some kind of thing on my phone, and I'm just taking my time. 

I even take a good break in between some of the procedures, just so I could take my time, I could make sure that each, every single procedure that I'm doing is precise and accurate. Like I said before, I take it into a nice, ritualistic procedure, when I'm putting down the vials, the raw powder, everything has its place. When I use it, I put it right back exactly where I had it. And you know, just because I have that certain procedure to make sure I have a peace of mind knowing when I'm done. 

I didn't make any mistake at all whatsoever. It's just my personal peace of mind, the reason why I have those, a little bit of OCD when it comes to homebrewing any of the pinnacles. Now with that being stated, I do want to say there are certain compounds out there that take a little bit longer of a time to homebrew. For example, if I were to homebrew DHB right now, that's gonna take me about 40 to 45 minutes to homebrew, simply because that's a really advanced compound.

It takes a much longer procedure, more solution, more time for me to make that DHB. And again, not a race, the only reason why I know that is because oh ok, it took me a little bit longer to homebrew, you know, this DHB, at this amount per cc. Other advanced compounds that takes a little bit longer as well would include Primobolan, both enanthate and acetate, Trestolone, any of the esters, Trestolone acetate, Trestolone enanthate, and of course, Trestolone decanoate, they all take a little bit longer because it's an advanced compound, a little bit more solution, a little bit more procedure. 

So it doesn't matter though which compound that I'm doing, in terms of homebrewing it, I take the same exact approach. I go in there knowing that I'm going to go here, no matter how long it takes me, six minutes to three hours, I am going to take my time because even though hypothetically, if it takes me 45 minutes to homebrew something as simple as test prop, I'm going to be using that same bottle for the next three and a half months. 

So I would rather take 40 to 45 minutes, really take my time and have that peace of mind knowing it was done and it was made properly. And that's pretty much what it comes to all the pinnables out there that I've homebrewed, even the ones that I didn't mention in this video, I have homebrewed it. Now the next thing that I do want to go over with you is the orals. This includes all the anabolic orals and of course the safety stuff as well.

Anadrol, DBol, Proviron, Anastrazole, Aromasin, Raloxifene, even Accutane itself, and even the fun stuff like Cialis and Viagra. Pretty much any orals that I make and I use, it takes me roughly, this is so bad, again, not a race, this isn't a time to be. For the sake of the record here, it takes me about 2 to 2 and a half minutes to homebrew any oral that I use right now. For example, the orals that I use right now, before I jump into my next cycle, right now I'm taking Anavar and Proviron. I do have Anastrozole  just in case, but in terms of Anavar and Prorviron. 

Each one of those compounds took me about two minutes to make. And it's ready to go for application. And that's pretty much how quick it is for me to make any single compound. Now if I were to make a combination, for example, I like to make sometimes a pre workout, test and Tren, the very short esters of test and Tren and make them into combination of a single bottle, that takes a little bit longer of a time for me to make that pinnable. 

Simply because it's more advanced, takes longer procedure, and again, I need to be a little bit more precise, because I'm combining two different compounds. Now, I've done three compounds before in one bottle, four compounds before as well, just to see how far I could push it. So the more compounds to put in a certain bottle, the longer the procedure is going to be. In terms of difficulty level, majority of about 90% of all the pinnables.

I'd say six out of 10, maybe seven out of 10, the only ones that I would rank about nine out of 10 as a difficulty level is again, the advanced compounds, the DHB, the Primobolan, the Trestolone. It doesn't matter which ester, but when it comes to DHB, Primobolan, Trestolone, it is a little bit higher skill level for me to homebrew that, so I will have to rank that at least nine out of 10. 

There isn't really a a pinnable out there that I would have to label 10 out of 10, because I would view that if there's a compound out there, that I would have to label as 10 out of 10, it is pretty much almost impossible to homebrew. But again, there isn't, every single pinnable out there, every single oral out there, I have homebrewed it, and I can't really state anything and label it to be 10 out of 10.

The majority of them out there are six out of 10, seven out of 10, and the advanced compounds nine out of 10 at best. And that's me really being over critical when it comes to the difficulty of these compounds. The last thing that I want to talk about is the color, which is always, it's two simple colors. It's either going to be crystal clear, or a slight tint of yellow, simply because that's just the color of the certain compound. But this is important for me to know.

Simply because if it goes above dark yellow or dark orange, that means something got messed up in the brew. So for all the guys who are using premades out there, if you've ever seen your vial to be dark orange or anything dark, that is bad Gear. Whoever made that, the pre made UGL place pretty much messed up and they still sold you that bunk underdosed over made Gear. So I wouldn't take that at all, because dude. 

I've seen some crazy, crazy premades out there to where they're willing to sell guys dark, blood red, supposedly Tren. And I can't even say how dangerous that is. So that's the reason why I really like to homebrew. I get to take it within my own hands and I get to dictate, I know for sure what it's supposed to look like, what it's supposed to feel like. 

And the last thing that I do want to address when it comes to all the pinnables that I make - the orals are super easy for me to judge, I take it, I feel it right away. In terms of the other priorities that I put when it comes to the pinnable, the one of the highest ones that I prioritize is the PIP. I want to make sure every single one of my comments that I'm homebrewing, there's no PIP at all whatsoever.

The only thing that I might feel is the pin going in. But when it comes to real PIP, to where it's really, really bad, that's one of the things that I completely avoid. Even DHB itself, I want to make sure even if it's something as an advanced compound or a heavy moleculed compound, I'm gonna guarantee myself that I'm able to enjoy it, because that's one of the things I enjoy about pinning, right? 

Anytime I'm looking forward to pinning, on my schedule Monday, Wednesday and Friday, sometimes I include Saturday depending on the type of compound, the only reason why I'm looking forward to it is because there's no PIP. I remember back in the day when I was using premades like an idiot, Jesus, every time I would pin, I'm scared. And I was escaped because of the needle, I'm scared because I know for sure if I were to pin that, there goes me walking like a regular person for the next week. 

That's how terrible premade places are man, it's like the PIP is guaranteed. But when a homebrew my stuff, I actually enjoy pinning, because pin, that's pretty much it. There's no PIP at all whatsoever. That's the beauty about being able to homebrew and customizing myself because there is no PIP. Now there are certain ones to where, you know, it's the very first time me using a compound, of course, I'm gonna experience a little bit of a PIP.

But I wouldn't really consider that PIP though. Real PIP lasts for about 5, 6, 7 days. If I were to feel something within the next day, that's normal, that's my body adjusting to it. Real PIP is again about a week long. And that's what I try to avoid. I got to make sure everything is nice, comfortable, I look forward into pinning it, and at the same exact time the quality of the homebrew stuff as well. 

So pretty much that's my entire list of all the stuff I have ever homebrew, all of the pinnables and all of the orals, and even a combination, even weird combination. Nowadays I just stick with a good cycle for bulking, a good cycle for cutting, a good cycle for recomp, because I've already tried it, I've already tested it, and I know which one my body really responds to. 

So I pretty much cycle about three or four different types of Gear compounds a year, because I already know it works for me, I react well to it. Like for example, test enanthate, I'm not going to touch any other ester, like Sustanon or cypionate, because I've already tried that pathway, and I've seen my body just really reacts well to test enanthate. 

Again, I'm not saying that's for everybody, it's just how my body works. So once I've figured out which type of cycles my body reacts to, that's what I'm going to homebrew. For example, my cutting cycle, it's always going to be test, Tren, DHB, Anavar, Proviron. Why? 

Because I've tried that so many times and it works amazing. I might switch out a compound here and there once in a while just to see or just to mix it up a bit, but I tend to use the same type of cycles over and over again, because it just works well with me. So if you have any questions again, the link to my email is right in the description. Other than that boys, Kai here, out. Take car



DELIVERED TO YOUR INBOX: - All Rights Reserved @ 2017 - 2020

Palm Beach, FL 33480